An authorization code is required to load the firmware. If you require a code, please send your request, along with the serial number of your POS LV system to: [email protected]
January 2024
Applanix POS LV Firmware version 11.46 is now available! This is the latest release for POS LV systems. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the links below or in the download firmware. An authorization code is not required to load the firmware.
DOWNLOAD 11.46 with GNSS Firmware Update
DOWNLOAD 11.46 without GNSS Firmware Upgrade
*Note that at minimum Windows 7 SP1, .NET 4.6 or newer are required. For computers not meeting this requirement, please view the readme.txt in the POSLoader folder to follow instructions on running the included executable to resolve this.
June 2023
Applanix POS LV Firmware version 11.40 is now available! This is the latest release for POS LV systems. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the links below or in the download firmware. An authorization code is not required to load the firmware.
DOWNLOAD 11.40 with GNSS Firmware Upgrade
DOWNLOAD 11.40 without GNSS Firmware Upgrade
*Note that at minimum Windows 7 SP1, .NET 4.6 or newer are required. For computers not meeting this requirement, please view the readme.txt in the POSLoader folder to follow instructions on running the included executable to resolve this.
June 2022
Applanix POS LV Firmware version 11.21 is now available! This is the latest release for POS LV systems. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the links below or in the download firmware. An authorization code is not required to load the firmware.
DOWNLOAD 11.21 with GNSS Firmware Update
DOWNLOAD 11.21 without GNSS Firmware Upgrade
*Note that at minimum Windows 7 SP1, .NET 4.6 or newer are required. For computers not meeting this requirement, please view the readme.txt in the POSLoader folder to follow instructions on running the included executable to resolve this.
Note: All firmware packages here are the version with GNSS firmware included, unless otherwise specified, which will be upgraded as well. If you require the firmware version without the GNSS firmware included please reach out to [email protected]
POS LV Firmware 11.01 - October 2021 Release Notes
DOWNLOAD v11.01 Firmware & POSView
POS LV Firmware 10.50 - December 2020 Release Notes
DOWNLOAD v10.50 Firmware & POSView
POS LV Firmware 10.30 - May 2020 Release Notes
DOWNLOAD v10.30 Firmware & POSView
POS LV Firmware 10.21 - January 2020 Release Notes
DOWNLOAD v10.21 Firmware & POSView
POS LV Firmware 10.11 - September 2019 Release Notes
DOWNLOAD v10.11 Firmware & POSView
POS LV Firmware 10.00 - May 2019 Release Notes
DOWNLOAD v10.0 Firmware & POSView
POS LV Firmware 9.97 - October 2018 Release Notes
DOWNLOAD v9.97 Firmware & POSView
POS LV Firmware 9.95 - August 2018 Release Notes
DOWNLOAD v9.95 Firmware & POSView
POS LV Firmware 9.60 - February 2018 Release Notes
DOWNLOAD v9.60 Firmware & POSView
POS LV Firmware 9.29 - September 2017 Release Notes
DOWNLOAD v9.29 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 9.13 - March 2017 Release Notes
DOWNLOAD v9.13 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 9.03 - December 2016 Release Notes
DOWNLOAD v9.03 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 8.64 - August 2016 Release Notes
DOWNLOAD v8.64 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 8.53 - April 2016 Release Notes
DOWNLOAD v8.53 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 8.47 - December 2015 Release Notes
DOWNLOAD v8.47 Firmware & POSView DOWNLOAD BD982 Firmware 5.03
POS LV Firmware 8.32 - June 2015 Release Notes
DOWNLOAD v8.32 Firmware & POSView
BD960 Firmware 4.21 - December 2010 Memorandum on BD960 Firmware
All customers currently under standard or extended software support are entitled to this release free of charge. If you require assistance, please send your request, along with the serial number of your system to [email protected].
February 2024
Firmware v8.30.213 for AP+ LV POS Systems
Applanix AP+ Firmware version 8.30.213 is now available for LV systems! This is the latest release for AP+ LV POS systems. All customers currently under standard or extended firmware support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
August 2022
Firmware v8.20.216 for AP+ LV POS Systems
Applanix AP+ Firmware version 8.20.216 is now available for LV systems! This is the latest release for AP+ LV POS systems. All customers currently under standard or extended firmware support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
NOTE: Users updating from the previous version 8.20.008 must deselect the Ethernet logging option in the web controller prior to upgrading to the new release v8.20.216
April 2022
Firmware v8.20.008 for AP+ LV POS Systems
Applanix AP+ Firmware version 8.20.008 is now available for LV systems! This is the latest release for AP+ LV POS systems. All customers currently under standard or extended firmware support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
All customers currently under standard or extended software support are entitled to this release free of charge. If you require assistance, please send your request, along with the serial number of your LVX / APX system to [email protected].
August 2022
Firmware v8.20.216 for LVX / APX-18 LV Systems
Applanix LVX and APX-18 LV Firmware version 8.20.216 is available. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
NOTE: Users upgrading with firmware older than 5.50-H must upgrade to 5.50-H before upgrading to firmware version 8.20.216.
April 2022
Firmware v8.20.008 for LVX / APX-18 LV Systems
Applanix LVX and APX-18 LV Firmware version 8.20.008 is available. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
Note, users upgrading with firmware older than 5.50-H must upgrade to 5.50-H before upgrading to firmware version 6.10-0.68-A.
October 2020
Firmware V6.10-0.68-A for LVX / APX-18 Systems
Applanix LVX and APX-18 Firmware version 6.10-0.68-A is available. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
Note, users upgrading with firmware older than 5.50-H must upgrade to 5.50-H before upgrading to firmware version 6.10-0.68-A.
November 2020
Firmware V5.50-H for LVX / APX-18 Systems
Applanix LVX and APX-18 Firmware version 5.50-H is available. All customers currently under standard or extended software support are entitled to this release free of charge. Instructions on how to load the firmware can be found in the download. An authorization code is not required to load the firmware.
LVX/APX-18 Firmware 5.50-F - March 2020 LVX/APX Firmware 5.50-F Release Notes
LVX/APX-18 Firmware 5.50-A - March 2019 LVX/APX Firmware 5.50-A Release Notes
LVX/APX-18 Firmware 5.40-B - November 2018 LVX/APX Firmware 5.40-B Release Notes
LVX/APX-18 Firmware 5.31 - January 2018 LVX/APX Firmware 5.31 Release Notes
LVX/APX-15 V2 Firmware 5.15 - October 2016 LVX/APX-15v2 Firmware 5.15 Release Notes
An authorization code is required to load the firmware. If you require a code, please send your request, along with the serial number of your POS LV system to: [email protected]
December 2023
Users installing POSPac MMS 9.1 are asked to uninstall previous versions of POSPac and Software Licence Utility (SLU) before installing this latest release. Note that the SLU is a separate entry in Windows Add/Remove Programs and so this must be uninstalled independently.
DOWNLOAD POSPac and Software License Utility 9.1 (2.1GB)
Please note that the installation process may cause a PC reboot.
Users not eligible to upgrade to POSPac 9.1, or those who do not wish to upgrade at this time, are recommended to install the standalone Software License Utility (SLU) 9.1. Ensure that the Client and Server are both running the same version of Software License Utility. The software license utility must be installed as an administrator.
9.1 STANDALONE SOFTWARE LICENSE UTILITY (18 MB)
Please refer to the license server migration change notice for further information.
POSPac v9.1 now supports the EGM2008 geoid. Users who wish to utilize the EGM2008 geoid can download the geoid file here. Please unzip the file and place it in the C:\ProgramData\Applanix\Geoids\ directory.
For installations utilizing the Lidar Tools, please download the MATLAB addition below.
MATLAB Runtime for Lidar Tools (3.6 GB)
POSPac MMS 9.1 is the latest post-processing package available for Applanix's POS Aided-inertial navigation system.
Customers under POSPac maintenance agreements with Applanix may upgrade free of charge.
Upgrade paths to POSPac MMS v9.1 differ for customers running USB key licenses and for those running software licenses.
For software license users:
The upgrade function is enabled only when running a standalone license or a locally managed network license, i.e. from the license server computer. Please also ensure the license computer has internet access
For USB key ("dongle") users:
July 2023
Users installing POSPac MMS 9.0 Hotfix are asked to uninstall previous versions of POSPac and Software Licence Utility (SLU) before installing this latest release. Note that the SLU is a separate entry in Windows Add/Remove Programs and so this must be uninstalled independently.
DOWNLOAD POSPac and Software License Utility 9.0 Hotfix (1.8 GB)
Please note that the installation process may cause a PC reboot.
Users not eligible to upgrade to POSPac 9.0 Hotfix, or those who do not wish to upgrade at this time, are recommended to install the standalone Software License Utility (SLU) 9.0 Hotfix. Ensure that the Client and Server are both running the same version of Software License Utility. The software license utility must be installed as an administrator.
9.0 Hotfix STANDALONE SOFTWARE LICENSE UTILITY (18 MB)
Please refer to the license server migration change notice for further information.
For installations utilizing the Lidar Tools, please download the MATLAB addition below.
MATLAB Runtime for Lidar Tools (3.6 GB)
POSPac MMS 9.0 Hotfix is the latest post-processing package available for Applanix's POS Aided-inertial navigation system.
Customers under POSPac maintenance agreements with Applanix may upgrade free of charge.
Upgrade paths to POSPac MMS v9.0 Hotfix differ for customers running USB key licenses and for those running software licenses.
For software license users:
The upgrade function is enabled only when running a standalone license or a locally managed network license, i.e. from the license server computer. Please also ensure the license computer has internet access
For USB key ("dongle") users:
February 2023
Users installing POSPac 8.9 Hotfix are asked to uninstall previous versions of POSPac and Software Licence Utility (SLU) before installing this latest release. Note that the SLU is a separate entry in Windows Add/Remove Programs and so this must be uninstalled independently.
PP-RTX Users are required to click the "Upgrade License" button in the SLU to ensure proper PP-RTX usage.
DOWNLOAD POSPac and Software License Utility 8.9 Hotfix (1.8 GB)
Please note that the installation process may cause a PC reboot.
Users not eligible to upgrade to POSPac 8.9 Hotfix, or those who do not wish to upgrade at this time, are recommended to install Software License Utility (SLU) 8.9 Hotfix. Ensure that the Client and Server are both running the same version of Software License Utility. The software license utility must be installed as an administrator.
8.9 Hotfix STANDALONE SOFTWARE LICENSE UTILITY (18 MB)
Please refer to the license server migration change notice for further information.
For installations utilizing the Lidar Tools, please download the MATLAB addition below.
MATLAB Runtime for Lidar Tools (3.6 GB)
POSPac MMS v8.9 Hotfix is the latest post-processing package available for Applanix's POS Aided-inertial navigation system.
Customers under POSPac maintenance agreements with Applanix may upgrade free of charge.
Upgrade paths to POSPac MMS v8.9 Hotfix differ for customers running USB key licenses and for those running software licenses.
For software license users:
The upgrade function is enabled only when running a standalone license or a locally managed network license, i.e. from the license server computer. Please also ensure the license computer has internet access
For USB key ("dongle") users:
Users installing POSPac from the list below must uninstall any previous version of the Software Licence Utility (SLU) and install the latest Software License Utility before installing POSPac. Ensure that the Client and Server are both running the same version of Software License Utility. Note that the SLU is a separate entry in Windows Add/Remove Programs and so this must be uninstalled independently. The Software License Utility must be installed as an administrator.
DOWNLOAD Standalone Software License Utility v9.1
8.8- February 2022 8.8 Release Notes
8.7 SP2- February 2022 8.7 Release Notes
8.6 - February 2021 8.6 Release Notes
8.5 - July 2020 - 8.5 Release Notes
8.4 SP2 - December 2019 - 8.4 SP2 Release Notes
8.3 SP3 - December 2018 - 8.3 SP3 Release Notes
8.2 SP1 - March 2018 - 8.2 SP1 Release Notes
8.1 - June 2017 - 8.1 Release Notes
8.0 SP1 March 2017 - 8.0 SP1 Release Notes
7.2 April 2016 - 7.2 Release Notes
7.1 SP3 December 2016 - 7.1 SP3 Release Notes
You are not authorized to view this document or your session has expired.
Please login to access this document.