?> Applanix: Support
Applanix - Inertial Technology Solutions CorporateProductsCase StudiesNews & EventsSupportContact
 
     


Overview

Self Maintenance

WEEE Directive

Data Processing

Contact Support

Terms & Conditions
 



July 9, 2008
Sanborn Selects Applanix’ LANDMark™ Mobile Mapping System
More...

July 7, 2008
Applanix Announces LIDAR Integration Options for DSS 439 RapidOrtho Airborne Mapping Solution
More...

July 7, 2008
Applanix Introduces RapidOrtho DualCam Airborne Mapping Solution
More...

View all News & Events

Download Media Kit

 



Subscribe to receive the latest news and information on Applanix geopositioning solutions, innovation and technology working for you. Subscribe Now!

 


If you require more information about any of our geospatial solutions, contact info@applanix.com

 


GPS Antenna (all systems)

  • Keep the ceramic antenna dome clean and free of scratches, as antenna dome imperfections will impact the GPS receiver's performance.
  • Inspect all antenna cables and connections once a year for loose cable ends, frayed cable insulation and scratched or damaged antenna surfaces.
  • Replace any damaged components.
  • No further maintenance is required.


IMU
(all systems)
The IMU is a sealed unit and requires no maintenance. The IMU LED on the PCS front panel will indicate if the IMU has had a catastrophic failure. Should this LED fail to light, inspect the IMU cable for damage. In either case, contact Applanix Customer Support. The IMU is a sensitive instrument and must not be subjected to excessive shock or vibration. The IMU has a shock gauge that will trip if the shock limit is exceeded. Extreme care should be exercised when performing any routine maintenance in the vicinity of the IMU.

Log-in to access technical and support documents available for your product.

Username
Password

Remember my Password

Forgot your Username or Password? Click here.


PCS
(all systems)
The PCS requires very little maintenance if it is protected from moisture and dust. Ideally the PCS should be mounted in a vibration isolated 19" rack. If it is not, the unit should be examined for vibration stress (such as loosened screws). Tighten all screws and connectors. Inspect all cables for wear or damage. Inspect cable tie-downs to ensure that cables are secured and out of the way.


DMI
(POS LV and POS TG only)
Clean the DMI regularly by spraying with water to prevent dirt build-up. Because the unit is exposed to significant vibration, the cAollet bolts and bracket mounting screws should be inspected regularly for tightness.

The DMI LED on the PCS front panel will indicate if the DMI has had a failure. Should the DMI LED fail to flash when the vehicle is in motion, inspect the DMI cable and cable connectors for damage. In either case, contact your Applanix customer support representative.